A roller thrust bearing is a kind of rotary bearing specially used to support axial force. In general, there are ball thrust bearings, tapered roller bearings, fluid bearings, and magnetic bearings, etc ...

Roller bearings can carry heavy load. Compared to traditional bearings with case, our full complement cylindrical roller bearings have higher loading capacity. Based on the same width, the roller bearings have smaller radial cross section, so they are space-saving but their rotary speed is lower relatively. All the multi-stage cylindrical roller bearings are designed with a lubrication groove and a lubricating hole on the outer ring ...

Thrust Bearings can support heavy axial loads. Their housing washer and shaft washer are made of bearing steel. The materials of their cage can be copper alloy, aluminum alloy, steel and plastics...

Slewing bearing is firstly applied in excavators and cranes, and gradually, it is used in other machines. It can carry not only thrust load, but also moment load and radial load ...

Deep groove ball bearings are the most extensively used bearings that are simple in design and are inseparable. The commonly used deep groove ball bearings are shielded deep groove ball bearings, open type deep groove ball bearings, single row deep groove ball bearings, and double row deep groove ball bearings...

Angular contact ball bearings have high limiting speed. They can carry radial load and axial load simultaneously, and carry only axial load as well.
The axial loading capacity of angular contact ball bearing is determined by contact angle. If the contact angle is increased, the axial loading capacity is increased...

Self aligning ball bearing, which has the self aligning function just like self aligning roller bearing, mainly bear radial load. It can also carry light axial load but it can not bear pure axial load...

Split spherical roller bearings are small in size and compact in structure. They can be installed directly without disassembling the circular shafts and other component parts used in conjunction with original bearings, which will save installation time and reduce cost...

A crossed roller bearing is designed to provide high level of rotational accuracy and rigidity, and in the meanwhile, it is space and material cost saving. This product is able to bear load in every direction as it comes with cylindrical rollers orthogonally arranged between the inner and outer rings. ..

A slewing drive is also called slewing gear drive or slewing reducer, etc. It is typically used in aerospace area, solar power systems, wind turbines, satellite broadcasting system, and engineering machinery like truck cranes, and man lifts, etc. Recently years, it has been prosperously used in photovoltaic power generation systems. ...

The inner and outer rings made from springs make this helical spring bearing flexible. In addition, there is a clearance between the inner ring and the outer ring. Therefore, the bearing can maintain good performance in bending distortion. So this spring bearing is very suitable for tandem mill and transmission equipment working at high temperatures...